M215 Installation and Operation
2014 Enphase Energy Inc. All rights reserved.
141-00012 Rev 06
14
Step 1: Register the System
Register the Envoy at the beginning of
the PV installation.
a.
Use your previously issued
username and password to log in
to in Enlighten.
If you haven’t registered, go to
www.enphase.com
and click
Enlighten Login
.
b.
At the installer dashboard, click
Add a New System
.
If you have already registered the
site, find the system under
Installations in Progress
.
c.
Under
System
, enter the system
Name, Type and Installer
Reference (optional).
d.
Enter
Installer
information.
e.
Under
Owner
, enter the Name,
Email, and Phone.
f.
Under
Location
, enter the Country
and address information.
g.
Under
Envoy
, select the Internet
Connection type and enter the
Envoy Serial Number.
NOTE
: If you have selected a
country other than the US, or if
you select Hawaii as the state
under
Location
, the
Grid
Profile
menu appears.
h.
If required, select the appropriate
profile from the
Grid Profile
menu.
Skip this step in the continental US
because the factory settings meet
requirements.
i.
Under
Modules,
enter total
number of modules, type, etc.
j.
Click
Save
to submit the form. You
will receive a confirmation
message: “Activation Created
Successfully.”
For more information on Grid Profiles
or if you need to change the grid
profile subsequent to this initial
procedure, see the
Envoy
Communications Gateway
Installation and Operation Manual
at:
http://www.enphase.com/support
.
