16
Manual
Rev. A
B. IrDA Compliant Infrared Module Connector
This connector support the optional wireless transmitting and receiving
infrared module. This module mounts to a small opening on system
cases that support this feature. You must also configure UART 2. Use
Infrared in Chipset Features Setup to select whether UART 2 is directed
for use with COM2 or IrDA. When IrDA is selected in BIOS, COM2 will
be disabled. Use the five pins as shown and connect a ribbon cable
from the module to the motherboard to the pin definitions.
Pin 1
Vcc
Pin 2
NC
Pin 3
IR_RX
Pin 4
GND
Pin 5
IR_TX
C. Wake-On-LAN (WOL)
Attach the 3-pin connector from the LAN card which supports the Wake-On-
LAN (WOL) function to the WOL connector on the motherboard.
This WOL function lets users wake up the connected computer through
the LAN card. Please install according to the following pin assignment by
the Page 15.
D. CD IN Connector
Provied 2 CD Audio Input Connectors that depending on the Cable
user have, which connect from CDROM to this Connector
