17
EN
Unlike QUICKSTART the satellite search will search the
whole satellite for channels and will not be instant.
Also the channels will appear in the order on the satellite
and not the pre-set order.
Auto search replaces any previous searched channels
with those of the new search. To add an extra satellite if
you have a suitable Dish/LNB/Switch you must use the
Dish Installation menu.
DTV (DVBT) Manual Tuning
You can manually tune DTV channels in the TV SETTINGS
menu. Press the Left/Right arrow buttons to select the
channel you wish to tune, then press OK button to scan
for the channel.
You can manually tune CADTV channels in the TV SET-
TINGS menu.
Note: for more information about the channel parameters
(frequency, symbol rate and QAM type), please check with
your cable TV provider.
Frequency
Select Frequency using the
buttons.
Symbol (ks/s)
Select the Symbol (ks/s) using the
buttons.
QAM Type
Select the QAM Type using the
buttons
ATV (analogue cable TV) Manual Tuning
You can manually tune ATV channels in the TV SETTINGS
menu.
Storage to
Press the
buttons to change the numbered location
of the found channel.
System
Select the system using the
buttons.
Current CH
Displays the current channel number, press the buttons
to choose the channel you wish to modify.
Search
Press the
buttons to scan through the frequencies to
ew channels.
Fine tune
In case of bad reception, you can press the
buttons to
mak
stments to the tuning. After manual tun-
ing is complete, please press the RED button to save any
found channels.
Press
/
to select DVB Select type, Country and Tune
Type, press OK to start scanning.
If you select ATV+D
rst 50% of the processing is
for ATV tuning, while the second 50% represent DTV tun-
ing. When ATV tuning, you can press MENU to Skip ATV
tuning and start DTV tuning or press EXIT to exit tuning.
During the channel search a preview of the already-found
channels is displayed.
CADTV (DVB-C) Manual Tuning
