Enovation Controls MURPHY PowerView PV500, Installation Manual

Page: 11 / 18

Section 78 - 9 - 00-02-1183
2019-11-21
Flush-Mounting the Unit
1. Place the back side of the display through the opening in the dash.
2. Evenly pull the display to be flush with the panel
3. Use the included four long screws and four locking nuts from the mounting kit
(78051705) to attach the unit to the bracket.
4. Torque to 10 inch-pounds.
Available Accessories for the PV500
The following PV500 accessories are available through Enovation Controls:
Part Number Description Order Details
78700664 PV500-LT, Non-connected Display
78090104 Programming Kit, PV450/PV780
Accessories
78051705 Kit, Mounting Bracket, PV500
78000688 Wire Harness, USB Adaptor