Enovation Controls Murphy PowerView PV380-R2, Operation Manual

Page: 18 / 30

Section 78 00-02-0997 (web only)
2019-10-07 - 16 -
Engine
Type
Specific Parameters Available
Mechanical

Speed Calibration

Overspeed
o
Shutdown

% Over High Speed

Fault at High Speed
o
Warning

% Over High Speed

Fault at High Speed
o
Disabled

Machine Hours
o
Set Machine Hours
o
Clear Machine Hours
Throttle Setup
Use the following to configure throttle settings.
System
Setting
Specific Parameters Available
Throttle

Throttle (Default: enabled)
o
Throttle Type

Display (Default)

Switch (Resistive Input 1 will be Throttle Switch UP,
Resistive Input 3 will be Throttle Switch DOWN)

Knob (Resistive Input 1 will be disabled, Resistive
Input 3 will be Throttle Knob)
o
Throttle Mode

For Types Display and Switch: Manual, Preset

For Type Knob: Manual
o
Setpoints

Ramp Rate Per Second

Inc/Dec Step Size
o
Low Speed Limit
o
High Speed Limit (with Overspeed at 5%)