Section 78
00-02-0883
2013-02-20
-9-
Fault Code Popups
A fault condition will trigger a popup dialog box on the screen describing the nature of the fault.
Corresponding red or amber fault lights on the corners of the unit are also activated to indicate
the severity of the fault. The following screen is an example of warning fault code popup.
WARNING
SHUTDOWN
How to Hide/Show Faults
To hide the fault code popup being displayed on the screen, press the soft key on the upper
right next to the “Hide” icon. The popup will disappear, however the “Warning” or “Stop” icon
will remain on the screen to indicate there is still a fault. Pressing “Hide” does not clear the
fault; it only hides the popup message.
When a fault code has been hidden, a “Recall” icon will remain on the right side. When this
soft key is pressed, the fault code will again be displayed. When a popup message has been
activated, a pop-up message will be displayed until the alarm is acknowledged by pressing the
“Hide” key.
Warning showing
Warning hidden, Recall button showing
1-800-548-1191 - http://www.partdeal.com - [email protected]
