Pagina 9
15.
SEARCHING OF FAILURES AND SOLUTIONS
• THE PUMP DOES NOT SUCK - Check that the rotation direction is correct. For pumps installed on the
filter, check that the pump has been filled. If you still do not aspire to check that there are no foreign bodies
inside the pump. Then, proceed with filling the pump body again.
• THE PUMP IS NOT PRESSURE - Check that there is no air in the circuit. Check that the free end of the
suction pipe is submerged. Proceed again to fill the pump body.
• EXCESSIVE DRIPPING OF THE FILTERED LAYERS - Check the correct tightening of the cartons. The
filtering cartons are not suitable and / or the gaskets are worn.
• THE FILTER DOES NOT REACH THE PRODUCTION PROVIDED - When the filter does not reach the
production expected from the table of layers, probably the type of cardboard suitable for the wine to be
filtered has not been chosen. Always consult the table.
• THE PRESSURE IS NOT SALE - Also in this case an unsuitable type of cardboard was chosen.
• DURING THE CARTOON FILTRATION THE PRODUCT STARTS TO EXIT DIRTY - This problem may be
caused by the pressure exerted on the cardboard used, which in some cases causes the fibers to open in
the filtering state, consequently the product is not filtered. The problem could also be the presence of air in
the filter circuit.
Summary of Contents for MINI VIRGILIO 10
Page 12: ...Pagina 12 ...
