User and maintenance manual
rev.0 – 02/12
ASSEMBLY - 33
Assembly 15
For easy-RAKE 8-10-12 -14
A) Install the Ø50x200 springs (pos. 91),
passing through the chain (twenty-one
38x23 rings) (pos. 90).
B) The first ring on the chain is to be attached
to the arm’s bracket with the M10x30 T.E.
screw (pos. 93), and the Ø10x30 washer
(pos. 92). The last ring on the chain is to
be attached to the end connector (pos. 89)
with a M10x30 T.E screw (pos. 93),
Ø10x30 washer (pos. 92) and M10 self-
locking nut (pos. 94).
Connector 89 must be place at a
distance of 50 mm. from bar passage
bracket (see assembly 11)
C) Connect one side of the spring (pos. 91) to
the arm’s bracket and the other side to the
fifth ring of the chain from the end
connector, with the spring’s hook facing
upwards (see fig. C).
To have less weight on the ground
place the spring hook at third ring of
the chain. To have more pressure on
the ground place the spring hook at
seventh ring.
N.B: for fine tuning turn the screw (pos. 43,
page 30) to adjust the rake wheel’s weight on
the ground.
FIGURA C
Summary of Contents for EASY RAKE 10
Page 2: ...INDEX ...
Page 40: ...User and maintenance manual rev 0 02 12 ASSEMBLY 40 ...