6
Setting the Reference Edge of the Instrument for your
Measurements
The default setting for the reference edge of the instrument is its
back edge. This means that any distance measurements you take
will be referenced to the back edge of the meter. You can choose
to use the front edge of the meter as the reference edge instead.
To do so, simply press the
key, and the next measurement
will use the front edge as the measurement reference edge.
Pressing it again will change it back to the back edge. Changing of
the measurement reference edge will be confirmed by a beep.
Each time you turn the meter on, the measurement reference edge
will be set to the default value (back edge).