19
Setting-Out Measurements
Hold down the
key to enter the setting-out function. First,
value a is being set, its second digit will flash. Select the desired
value for this digit by pressing the + and – keys (0 to 9). To change
digits, press the
key. For every press of the
key,
the selected digit moves one place to the right and finally cycles
back to the first digit. After you finished entering the value of a,
press the
key again to start setting the value of b. After
value b has been set (using the same method as for value a), press
the
key again to finish entering values for a and b, and to
enter the setting-out measurement mode.
After entering the setting-out mode, the third row of the
secondary display area shows the value of the set distance of the
