background image

-

 14 

 

 

Your 3000 EX appliance has been manufactured with the greatest care using quality 

materials. Numerous tests and inspections were carried out during production.

 

Every  component  meets  the  requirements  of  strict  specifications  in  order  to 

guarantee performance and adaptability.

 

For all maintenance work and spare parts, your 3000 EX dealer ensures the supply 

of  spare  parts  in  accordance  with  the  3000  EX  requirements,  guarantee  of  quality 

and of safety.

 

ENNIS FLINT WARRANTY:

 

Warranty of Operation for one year under the following conditions:

 

 

that the appliance has been used in compliance with the user's guide;

 

 

that  the  appliance  has  not  been  disassembled  except  for  the  procedures 

described in the user's guide;

 

 

that the appliance is physically intact (for example: the body of the appliance, 

the protective guard and the combustion nozzle grille must not be deformed in 

any way, and, for example, the thread of the fittings must be intact

…).

 

This warranty does not apply to the following replacement parts:

 

 

Piezo igniter,

 

 

Hose.

 

Aluminium  Body  Warranty:  5  years  (according  to  the  aforementioned 

performance warranty conditions) ).

 

All replacement parts must be original 3000 EX spare parts. The manufacturer shall 

not be held responsible and shall not be liable for any claims in the event that the 

aforementioned warnings and instructions are not respected. 

 

The company SEFMAT shall not be held responsible for accidents involving persons 

or goods which arise from the incorrect use of the appliance or from using it for an 

application which is not specifically mentioned in the user's guide. All disputes shall 

be governed by the courts of Bordeaux 

-

 France. No other place of jurisdiction shall 

be accepted.

 

The  use  and  the  resale  of  the  3000  EX  implies  the  acceptance  of  the 

aforementioned terms and conditions.

 

In the event of a warranty claim, please attach a copy of 

your supplier's invoice

 

 

 

 

WARRANTY

 

Summary of Contents for 3000 EX

























Reviews: