
⑦
When the maintenance interval time is
reached, and the LCD display will flashing,
and press the "
SET
" or "
MENU
" button to
clear the status, the next maintenance
interval time starts timing.
a) Press the "
MENU
" button twice until display shows "
SVC
" icon and
maintenance interval time.
The selection of the hours mode and RPM mode.
b) At the hours mode interface, press and hold the "
MENU
" button until
display the icon "
RPM
" and "
0
" on the screen, which means enter into the
RPM mode; Similarly, at the RPM mode interface, press and hold the
"
MENU
" button to enter into the hours mode.
a) When entering the DSP-2 system, the first entry is the hours mode.
a) Hours mode contains TOT function, JOB function, SVC function
b) The use and settings of the TOT function, JOB function, and SVC
function are the same as described in DSP-1.
b) Press and hold the "
SET
" button until display shows "
SVC
" icon and
maintenance interval time starts flashing.
c) Press "
SET
" or "
MENU
" button until you get desired hours, release
the button, the LCD will flash for 10 seconds and return to "
TOT
" (total
hours).
d) When the maintenance interval time is reached 0, the "
SVC
" icon will
flash. The SVC time setting range is 0-2000H. If the SVC is set to OFF,
which means the SVC function is closed.
Programming SVC time:
SVC
---- Maintenance interval time.
Note:
Timing is countdown.
4. The function and operation under the DSP-2 system.
1
The function circulation of the hours mode.
2
Press the button
twice
Press and hold
the button for 2S
Press and hold
the button
8