1. Please make sure to refer to the installation instructions in the
operating instructions to avoid damage caused by installation errors.
2. The product included the battery inside and can not be replaced,
do not disassemble or replace the battery by yourself.
3. Do not pull the wiring when using it to prevent falling off or poor
contact happened.
4. Please install the product in a proper location to avoid the
possibility of this product being hit and prevent damage to the
product.
5. The product has certain waterproof function, but can not be used in
deep water or soaked in rain for a long time.
6. Please use the product at the specified temperature, high
temperature environment may cause damage to the product.
This product can be directly installed with double-sided tape or screwed, the
installation method is as follows:
a) Clean properly the surfaces.
Note:
Make sure the surface is flat and the oil
is clean enough.
b) Stick the double-sided tape on the back of
the product.
Note:
Before pasting the double-sided tape,
please make sure the back of the product is
clean and tidy, without moisture or grease.
c) Remove protection from double-sided tape
.
Note:
When removing the double-sided tape
protector, make sure that the double-sided
tape is not exposed to water or oil on both
sides.
d) Fix the tach hour meter in a proper position.
Note:
Before pasting the double-sided tape,
please confirm that the pasted place is clean
and tidy, no moisture or oil.
Product Accessories List
Product Installation
1. Double-sided tape installation:
Proper position requirement:
No moisture, no grease, is a plane, no violent
vibration, and the temperature not exceed 125 F.
①
product*1
1
double-sided tape*1
2
paper card*1
3
user manual*1
4
cable tie*2
5