9
5 Align the board by making sure the standoffs with shoulders are
inserted into their matching holes on the board.
6 Mount the board to the chassis by inserting the mounting screws
supplied with the chassis through the holes on the server board.
CPU Bracket:
To remove the CPU bracket:
Nip the hook of the bracket and pull the bracket, and then the
bracket is divorced from the hole of pedestal, pull right.
To mount the CPU bracket:
Nip the hook of the bracket, aims at the bridge type hook on the
pedestal to pull left.
The pedestal is used to support the Intel Xeon CPU.
Summary of Contents for EN-898X
