39
EN
Enabling voice assistant
When the neckband speaker is connected to a mobile phone via Bluetooth
®
you can
enable the voice assistant on your smartphone using the neckband speaker.
Press and hold the
button to enable the voice assistant.
An acoustic signal sounds, the voice assistant is enabled and now responds to your
voice commands.
The functionality of the voice assistant depends on the smartphone used
and cannot be guaranteed.
SWITCHING OFF THE NECKBAND SPEAKER
Press and hold the
button for about 3 seconds to switch off the neckband
speaker.
The neckband speaker switches off with an acoustic signal and the operating LED
goes out.
STORING THE DEVICE WHEN NOT IN USE
NOTICE!
Possible material damage!
Risk of damage to the device due to improper
use of the device.
Fully charge the neckband speaker every 2 months
to avoid damage to the battery.
