36
BEFORE USING THE DEVICE FOR THE FIRST TIME
Charging the neckband speaker
Remove the neckband speaker from the packaging.
Ensure that all packaging materials have been removed.
Open the micro-USB compartment and connect the neckband speaker to a USB
power supply with an output current of at least 1000 mA using the supplied USB
cable.
As soon as the neckband speaker is connected to a power source, the built-in re-
chargeable battery begins charging automatically.
The battery charging time is about 3 hours.
The charging LED lights up red during charging.
The charging LED goes out as soon as the built-in battery is fully charged.
The operating LED flashes red slowly if the battery charge level is too low
and the battery needs to be charged.
Remove the USB cable and close the micro-USB compartment as soon as the bat-
tery is fully charged.
NOTICE!
Possible material damage!
Risk of damage to the device due to improper
use of the device.
Do not use a standard USB 2.0 or USB 3.0 port, such
as on a PC or notebook, to charge the device. Only
use an external USB power supply with an output
current of at least 1000 mA.
