EN
28
and above and persons with
reduced physical, sensory
or mental capabilities or
lack of experience and
knowledge if they have
been given supervision
or instruction concerning
use of the charger in the
safe way and understand
the hazards involved.
Children shall not play with
the charger. Cleaning and
user maintenance of the
charger shall not be made
by children without adult
supervision.
●
If the supply cord is
damaged, it must
be replaced by the
manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard.
●
Only use this charger
151220.01 to charge the
battery pack 151218.01.
●
To charge the battery, use
only the charger supplied
●
Never charge non-
rechargeable batteries.
●
During charging the
batteries must be placed in
a well ventilated area.
Vibration and noise reduction
To reduce the impact of noise and vibration
emission, limit the time of operation, use low-
vibration and low noise operating modes as
well as wear personal protective equipment.
Take the following points into account to
minimize the vibration and noise exposure
risks:
●
Only use the product as intended by its
design and these instructions
●
Ensure that the product is in good condition
and well maintained
●
Use correct attachments for the product
and ensure they are in good condition
●
Keep tight grip on the handles surface
●
Plan your work schedule to spread any high
vibration tool use across a longer period of
time.
Residual Risk
Even if properly operating and handling this
product in accordance with all the safety
requirements, potential risks of injury and
damage remain. Due to its construction and
build, this tool may present the following
hazards:
a) There is risk of a short-circuit due to liquids
penetrating the housing. Do not immerse
the product and the accessories in water.
Make sure that no water or other liquids
can enter the housing.
b) Ear damage if working without ear
protection
c) The inserting tool might still be hot after
the application. Burn hazard when touching
the inserting tool. Do not touch the
inserting tool barehanded. Wear protective
gloves!
d) The harmful /toxic dusts produced during
operation pose the risk to the health of the
operator and persons in the vicinity. Wear
eye protection and a dust mask.