32
OPERATION
NOTE
●
The appliance vibrates during operation. Therefore, always put it down during
operation. There are four stands
6
on the bottom of the appliance for this purpose.
◆
Remove the required accessories from the accessory compartment
3
.
Switch on and off
Switch the appliance on:
◆
Push the ON/OFF switch
1
into the position "I" to switch the appliance on. The
integrated control lamp lights up.
Switch the appliance off:
◆
Push the ON/OFF switch
1
into the position "O" to switch the appliance off. The
integrated control lamp goes out.
CAUTION!
●
Caution! This appliance is not designed for continuous operation. To prevent the motor
from overheating, the appliance may only be used as follows: within a period of 10
minutes the appliance may only be operated at the rated power input for 15% of the
period, in other words, 1.5 minutes. During the rest of the time period (cooling phase
8.5 minutes), the appliance cools down again.
Compressed air hose with quick coupler
5
Connecting:
◆
Push the compressed air connector
9
into the quick coupler of the compressed air
hose
5
, the sleeve automatically springs forwards.
Disconnecting:
◆
Pull back the sleeve on the quick coupler of the compressed air hose
5
and remove
the compressed air connector
9
.
CAUTION!
●
Caution! When disconnecting the quick coupler of the compressed air hose
5
, hold
the coupler firmly to prevent injuries caused by the hose flying off.
Summary of Contents for 151590.01
Page 2: ...2 1 3 4 5 6 2...
