EN
13
EN
CLEANING
Attention:
Never place the appliance body, plug or power cord in water or other liquids; always wipe clean
with a damp cloth.
Attention:
Maintenance must only be carried out when the appliance is switched off, disconnected from the
power supply and with the thickness adjustment lever (A) set to ‘0’.
•
A soft cloth, slightly dampened with water, is sufficient to clean all appliance parts.
•
Never use abrasives, detergents or solvents of any kind. Never immerse the appliance into water.
•
The removable parts of the slicer are not dishwasher safe since the high temperature could cause
the deformation of plastic. Dry any parts thoroughly before storage.
•
It is good practice to clean the appliance after every use so that any debris or parts of sliced foods
do not dry out, sticking the components.
•
If the appliance is not used for long time, protect it against dust or other dirt, eventually using an
apposite cover.
Removal of the blade
Attention:
The blade is very sharp and dangerous. Use with care!
Attention:
Maintenance must only be carried out when the appliance is switched off, disconnected from the
power supply and with the thickness adjustment lever (A) set to ‘0’.
•
To clean the appliance thoroughly, it is possible the blade. Rotate the blade locking device (F)
situated in the middle of the blade (Fig. 3).
•
Replace the blade in its correct original position after cleaning. Screw the locking device correctly.
Attention:
After having removed the blade, make sure no water get into the appliance.
OP
EN
3
