7
•
Only use the steam push button when the steam iron has reached the steam or maximum tempe-
rature.
•
Do not press this burst steam button more than 3 times at once. For optimal steam output, leave an
interval of at least four seconds between pressing the burst steam button.
•
The burst steam feature can be used with Dry or Steam ironing as desired.
•
ATTENTION: Never direct the steam towards people. Burns or serious injury may occur.
VERTICAL SHOT OF STEAM
•
When the temperature control knob is set to a steam setting (between “
•••
” to “MAX”) vertical
steam can be used.
•
Simply hold the iron vertically, positioned in front with a slight distance from the item to be steamed,
and press the burst steam button.
•
ATTENTION: Never direct the steam towards people. Burns or serious injury may occur.
NOTE
This is especially useful for getting wrinkles out of hanging clothes, curtains, wall hangings etc.
Automatic anti-calc function
•
Your iron contains an anti-calc cartridge to reduce scale deposits. This considerably prolongs the
operational life of your iron.
•
The anti-calc cartridge is an integral part of the water tank and dose not needs to be replaced.
Automatic anti-drip function
•
Your iron have anti-drip function. The iron automatically stops generating steam when the tempera-
ture is too low to prevent water form dripping out of the soleplate.
NOTE
When the steam will be on, wait for few seconds. The steam takes time to be ready.
Self clean function
•
Use the self clean function once every two weeks. If the water in your area is very hard, the self clean
function should be used more frequently.
•
Make sure the iron is unplugged.
•
Set the steam control knob to "0" position.
•
Fill the water tank to the maximum level.
•
Put the plug in the wall socket.
•
Select the maximum ironing temperature.
•
Unplug the iron when the temperature pilot light has turned off.
•
Hold the iron over the sink, rotate the steam knob to “self-clean” position and hold it, and you may
gently shake the iron to and fro.
•
Release the self clean dial after 5-10seconds.
•
Repeat the self clean process if the iron still contains a lot of impurities.
Note:
Steam and boiling water will come out of the soleplate, impurities and flakes(if have)will be flushed out.
Do not push and hold the self clean button while ironing.
Self
clean
0
