background image

 

6

 

 

FCC Warning 

 

This  device  complies  with  Part  15  of  the  FCC  Rules.  Operation  is  subject  to  the  following  two 

conditions: 

(1)  This  device  may  not  cause  harmful  interference,  and  (2)  This  device  must  accept  any 

interference received, including interference that may cause undesired operation. 

 

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital 

device,  pursuant  to  part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable 

protection  against  harmful  interference  in  a  residential  installation.  This  equipment  generates, 

uses and can radiate radio frequency energy and, if not installed and used in accordance with the 

instructions,  may  cause  harmful  interference  to  radio  communications.  However,  there  is  no 

guarantee  that  interference  will  not  occur  in  a  particular  installation.  If  this  equipment  does 

cause harmful interference to radio or television reception, which can be determined by turning 

the  equipment  off  and  on,  the  user  is  encouraged  to  try  to  correct  the  interference  by  one  or 

more of the following measures: 

‐ Reorient or relocate the receiving antenna. 

‐ Increase the separation between the equipment and receiver. 

‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected. 

‐ Consult the dealer or an experienced radio/TV technician for help. 

 

NOTE  2:  Any  changes  or  modifications  to  this  unit  not  expressly  approved  by  the  party 

responsible for compliance could void the user's authority to operate the equipment. 

 

 

Summary of Contents for E-AL01










Reviews: