enistic
Energy Manager Starter Kit
Order code: EN-SSK
+44 (0)844 875 1600 | www.enistic.com
Using the plug-in Smart Socket
1.
The Smart Socket will enable
you to measure the electricity used
by a particular piece of equipment
(e.g. photocopier, PC, printer).
2.
Simply plug an electrical device
into the Smart Socket and then
connect the Smart Socket to your
electricity supply.
3.
Use the red button to switch the
unit on or off. (If you choose to
upgrade your software to Energy
Manager Pro or Online, this
switching
can
be
controlled
remotely.)
4.
The plug-in Smart Socket
communicates wirelessly with the
SECL (which is pre-configured to
automatically detect the Smart
Socket). It should be located within
30 metres of your SECL.
5.
The Enistic system uses a
meshing technology, meaning that
every module ‘talks’ to every other
module, in order to maximise
range and reliability. If you decide
to extend your kit, you should not
require an additional SECL, so long
as you ensure that each module is
within 30 metres of any
other module.
If a Smart Socket is
more than 30 metres
away from the SECL, it will not be
able to communicate directly but
will use other modules in range to
‘pass on’ the message to ensure
100% operation.
6.
Once you have monitored the
energy usage of a particular
device, using Energy Manager, you
can move the Smart Socket to
assess
a
different
piece
of
equipment.
7.
If you wish to extend your kit, so
that you can monitor (and/or
automatically
control)
more
devices, 5-way Smart Sockets are
also available to purchase via our
website.