50
Transformer HD Power States
Standby
When your Transformer HD is not in use you may want to place it into Standby. Placing your
device into standby mode saves power and allows a quicker return to normal operation than
compared to a full shutdown. You should follow the instructions below to place your device
into Standby.
1.
Locate the Green Power Button (Located on Transformer HD).
2.
Press this button once for less than 5 seconds.
3.
To resume simply press the Power button again.
4.
If your device is connected to power even when you reset it the power state will be
“Standby”
Shut Down
When your Transformer HD is not in use you may want to Power it OFF. Placing your device
into a full shutdown preserves your battery level but takes a little longer to start up when
compared with Standby. To do a full shutdown you should follow the instructions below.
1.
Locate the Green Power Button.
2.
Ensure that device is not connected to External Power and is not charging.
3.
Press this button and hold for 5 seconds to begin the Shutdown Sequence.
4.
All the LED Status Indicators will turn off when the process is complete.
Summary of Contents for Transformer HD
