ENHANCED VISION Transformer HD, User Manual

Page: 19 / 60

19
Display and Connection Readiness Table
Unit
State
White LED Description
ON BLINKING ON and OFF
Device is not currently connected to any
display interface but the device is on and
ready to establish connection to HDMI,
USB 3.0 or Wi-Fi.
*Please note that if you wish to power off
the device and turn the blinking lights off
simply hold the green power button down
for five seconds.
ON
Default ON (User
defined)
Device is connected via Wi-Fi/USB/HDMI
*Please note that you can toggle the Light
On and Off via application or On-Board
Controls.
Standby OFF
This is a power saving mode and User
must hit the Green Power button to
power the device On to make it ready for
use.
OFF OFF
Device is Off (unless turned off by User)
and is not ready for connection.
*Please note that the device is powered
on by a brief power button press.
This table indicates whether or not your device is on and ready to Pair. Please pay special
attention to the fact that the White LED can be turned on or off by the user when device is
already in operation for illumination and is not exclusively used for device status. In this
circumstance please also reference the status LED’s underneath the HDMI and USB 3.0 ports
on the back of the Transformer HD.