11
10
C
hapter
3
u
sing
the
p
ebble
C
hapter
3
u
sing
the
p
ebble
Figure 1
Figure 2
power options
Your Pebble can be powered using:
▶
The included AC adaptor/power supply
▶
Rechargeable batteries (included)
When using the Pebble for the first time, please
power the unit using the included AC Adaptor/power
supply. This will ensure that the rechargeable
batteries can fully charge, even while the Pebble is
in operation.
Although regular Alkaline batteries may
work to power the Pebble, the battery life may vary
and will be reduced significantly compared to using
rechargeable batteries.
Connecting the aC adaptor/power supply
Use the following procedure to connect the Pebble
to the AC adaptor/power supply:
1) Connect the tip of the included
AC adaptor/power supply to the
DC IN port on the bottom edge of
the Pebble (See Figure 1).
2) Plug in the remaining end of the
AC adaptor/power supply to an
available AC wall outlet (mains)
(See Figure 2).
turning the power on/off
Use the following procedure to turn the power of
your Pebble On or Off:
adjusting the image Size
Use the following procedure to adjust the displayed
magnification (size) of the LCD image.
1) Find the green, recessed
POWER button located on the top
side edge of your Pebble.
(See Figure 1)
2) Press and hold the POWER
button to turn the Pebble on.
Shortly, an image should appear
on the LCD display. To turn off the
Pebble, press and hold the
POWER button again (Figure 2).
Note: A short, confirmation tone (“beep”) will be
heard when the unit is powered On or Off.
1) Find the SIZE button located on
the lower right face of your Pebble
(See Figure 3).
2) Press the SIZE button to
change the magnification size on
the LCD. Pressing this button will
continuously cycle through all 3
magnification sizes
(See Figure 4).
Figure 3
Figure 1
Figure 4
Figure 2
USinG tHe peBBle