Step #1: Locate the black
glare shield which is shown
on Page 9 Item #A. Please,
notice both the tabs on the
glare shield and the
receiving indents along the
face plate for Jordy just
above the dual displays.
*Note: You can use the
prescription insert and glare
shield simultaneously
.
Step #2: Grasp the Shield
firmly as shown and insert
the tabs into the previously
mentioned indents. Slide
them in until they “Click” into
place. Please be careful not
to insert the glare shield
tabs at an angle or roughly
to avoid breaking or
damaging your Jordy.
Step #3: The glare shield
should now be fully installed
and should help reduce the
amount of glare visible
when using the device in
outdoor environments. To
remove the glare shield
simply grasp the shield by
the center arch and gently
pull straight back until the
shield comes loose.
INSTALLING THE GLARE SHIELD
Jordy is designed to be used indoors and outdoors. To
minimize glare when outside an optional glare shield
may be installed.
Installing the Glare Shield
16