ENGWE-BIKES SJB-1, Operation And Maintenance Manual, Page: 11 / 20

Operating Your New e-Bike
Your e-bike is driven by a motor embedded in the hub of the rear wheel. The motor is
powered by a battery. The amount of power delivered to the motor, and hence the
accelerating force on the e-bike, is controlled by you in a way according to the power-
assisted mode you choose.
You can configure the e-bike to operate in the pedal-assist-only-mode or the full power
mode (should check against local laws to ensure full power mode is permitted) where
you can also use the hand throttle to deliver power to the motor.


Handlebar
’s Functions
You can charge your phone with the USB charging port.


Your First Ride
(Reprinted from the Safety and Compliance with the Law section)
Please be VERY CAREFUL when you are ready to get on your e-bike for the first
time because the e-bike moves significantly faster than a regular bicycle at active
power-assisted mode. Take your e-bike to an area with a lot of open space before
you start. Do not start pedaling hard as soon as you get on the e-bike (as you
normally would do with a regular bicycle), as the e-bike will accelerate under pedal-
assist mode and you may be unprepared for the sudden increase in speed.
However, after a few times, you will enjoy using the pedal-assisted function.
- 10 -