30
E
901RF FULL USER MANUAL
It is important to place the receiver and transmitter in places where nothing is interfering with the radio signal. The range of communication between
the transmitter and the receiver in an open area is up to 60m. The radio transmission is influenced by many factors that can shorten the working distance,
such as thick walls, drywall covered with aluminum foil, metal objects such as cabinets, general radio interference, etc. However, the range is sufficient
for most domestic applications. It is recommended that the radio transmission between devices has to be tested before mounting the thermostat to the
wall. The test can be performed by changing the set temperature, i.e. by activating or deactivating the heating.
7.1 Transmission test
1
2
3
5
4
Check that the thermostat is not sending a signal to heat.
Press any button to highlight the display.
Press button to enter comfort temperature mode.
The sun icon should be visible on the display.
Using or buttons set new comfort temperature value.
The thermostat started sending a heating signal when the
screen went blank, which was signaled by the antenna
symbol.
Confirm by button or wait until the thermostat will
approve your choice itself and display the main screen.
Summary of Contents for E901RF
Page 1: ...FULL MANUAL E901RF Programmable wireless thermostat ...
Page 37: ......
