(c) Place 2 caps on top of each wall retainer.
Note orientation as caps are handed.
Apply a small bead of silicone to secure
if necessary.
Page 9
(a) Cut drip seal to length and press fit onto
bottom of door on both sides of hinge.
Ensure seals are flush with sides of
hinge and edges of glass. Notch end of
seal to allow space for vertical door seal.
2.4 Seal installation
2.4.1 Drip seals
Notch in
end of seal
(a) Door glass position can be adjusted at
the hinges.
2.5 Hinge adjustment
Right hand side
Left hand side
View from inside of shower
2.4.2 Door edge seal (1200 x 900 only)
(a) Cut door edge seal to length and notch
bottom end of seal to allow space for
horizontal door seal. Press fit onto edge
of door (Seal flap must be on inside
of shower).
Profile
Notch in
Flap must be on
inside of shower
end of seal
Profile
(b) Repeat step (a) for the other door wall
retainer.
INSTALLATION INSTRUCTIONS
MILANO Alcove