Poweramp Output, 4 Ohms Parallel
4 ohms speaker output jacks, internal connected parallel.
Poweramp Output, 8 Ohms Parallel
8 ohms speaker output jacks, internal connected parallel.
Poweramp Output, 16 Ohms
16 ohms speaker output jack.
Cabinet options
1. One 4 Ohm cabinet connected to a 4 Ohm jack
Summary: 4 Z, --> connected to 4 Ohm output
2. Two 8 Ohm cabinets connected to the 4 Ohm jacks
Summary: 8 Z + 8 Z, --> connected to 4 Ohm + 4 Ohm output
3. One 8 Ohm cabinet connected to an 8 Ohm jack
Summary: 8 Z, --> connected to 8 Ohm output
4. Two 16 Ohm cabinets connected to the 8 Ohm jacks
Summary: 16 Z + 16 Z --> connected to 8-ohm + 8-ohm output.
5. One 16 Ohm cabinet connected to the 16 Ohm jack
Summary: 16 Z --> connected to 16 Ohm output
6. An 8 Ohm cabinet connected to one of the 4 Ohm jacks in combination
with a 16 Ohm cabinet connected to one of the 8 Ohm jacks
Summary: 8 Z + 16 Z --> connected to 4-ohm + 8-ohm output
Important Note:
Never operate the power amp without a sufficient load, otherwise you may damage or destroy it! Always
check the connected cabinets‘ impedance to confirm it matches the amp‘s output impedance! For example,
if you are connecting a cabinet to one of the two 8-ohms output, make sure the speaker system is indeed
rated for 8 ohms. You‘ll find the various speaker and cabinet options listed in the section above. I cannot
stress enough the importance of proper impedance matching when connecting one or more cabinets to
your amp. Impedance mismatching can damage the power amp!
Summary of Contents for Screamer 50 II Combo E330II
Page 1: ...E330II Screamer 50 II Operator s Manual...
Page 16: ...www engl amps com...
