34 Power Tube V6 Fuse (Retro Tube 100 Amp - E765)
CAUTION: Switching off the amp and pull the mains plug before opening the fuse
drawer!
Need-to-know info:
35, 36 Poweramp Output, 4 Ohms Parallel
37, 38 Poweramp Output, 8 Ohms Parallel
39 Poweramp Output, 16 Ohms
IMPORTANT NOTE, please read and heed:
Cabinet options
A fuse in the rear chamber of this fuse drawer protects the V6 (Retro Tube 100) power
tube. It is designed to blow in the event of an electrical problem with tube V6 (Retro
Tube 100). The Power Tube Fuse LED (28) lights up to indicate that one or several of
the four fuses has blown. There is a replacement fuse in the front chamber of the fuse
drawer.
Always make sure replacement fuses are of the same type and
have the same ratings as the original fuse! See section 28 for some more key facts
about tube defects.
4 ohms speaker output jacks, internal connected parallel. For diverse cabinet options
!
8 ohms speaker output jacks, internal connected parallel. For diverse cabinet options
!
16 ohms speaker output jack. For diverse cabinet options
!
Never operate the power amp without a
sufficient load, otherwise you may damage or destroy it! Always check the connected
cabinets' impedance to confirm it matches the amp's output impedance! For example,
if you are connecting a cabinet to one of the two 8-ohms output, make sure the
speaker system is indeed rated for 8 ohms. You'll find the various speaker and cabinet
options listed in the nest section. I cannot stress enough the importance of proper
impedance matching when connecting one or more cabinets to your amp. Impedance
mismatching can damage the power amp!
1. One 4-ohm cabinet connected to a 4-ohm jack;
Summary: 4 Z, -> connected to 4-ohm output.
2. Two 8-ohm cabinets connected to the 4-ohm jacks;
Summary: 8 Z + 8 Z, -> connected to 4-ohm + 4-ohm output.
3. One 8-ohm cabinet connected to an 8-ohm jack;
Summary: 8 Z, -> connected to 8-ohm output.
4. Two 16-ohm cabinets connected to the 8-ohm jacks;
Summary: 16 Z + 16 Z -> connected to 8-ohm + 8-ohm output.
5. One 16-ohm cabinet connected to the 16-ohm jack;
Summary: 16 Z -> connected to 16-ohm output.
6. An 8-ohm cabinet connected to one of the 4-ohm jacks in combination
with a 16-ohm cabinet connected to one of the 8-ohm jacks
Summary: 8 Z + 16 Z -> connected to 4-ohm + 8-ohm output.
abinet options
abinet options
abinet
options
see the chapter
see the chapter
see the chapter
C
C
C
16
