background image

 

 
 

1.

 

The light has a button to control the light:Press the button, the light will change the brightness 100%-50%-OFF-

100% 

2.

 

The light has two charge input: one is the 4.2V/1A adapter(supplied), another is 5V/1A Micro USB input  

                  

CAU

 

TION WHEN CHARGING

 

 

SECTION TWO 
SITING INSTRUCTION 

  Check the pack and make sure you have all of the parts listed. 

  Decide on the appropriate location for your product. 

  This product contains glass so care must be taken when fitting or handling to prevent personal injury or 

damage to the product. 

  This product is suitable for outdoor use. 

  Ensure the cover is fully fitted to the d.c. socket to ensure its IP65 rating. 

  This product is rated IP65. It is suitable for outdoor use but should not be immersed in water or 

subjected to standing water. 

  Warning: This appliance can be used by children aged from 8 years and above and persons with 

reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been 
given supervision or instruction concerning use of the appliance in a safe way and understand the 
hazards involved. Children shall not play with the appliance. It is recommend to use the product at 
ambient temperature above 

0℃

only. 

  The light source of this luminaires is non user replaceable; The light source contained in this luminaire 

shall only be replaced by the manufacturer or his service agent or a similar qualified person. 

  Caution: Do not stare directly at the LED light beam. 

  Check the cable, plug and the unit for any damage, if damaged DO NOT use the luminaire . 

  Do not use lamp whilst charging. 

  If the product is not used for over 3 months, it must be recharged before use. 

  Screw must be locked tight 

  Never modify the luminaire, there are no user serviceable parts inside. 

  Repairs should only be carried out by a suitably qualified person. 

  Regular cleaning of luminaires should be carried out at regular intervals not only to ensure good optical 

performance but also ensure that dirt does not accumulate to such an extent as to impair the electrical 
orthermal safety of the fitting. This should be done with the luminaire switched off/isolated and a soft 
damp cloth should be used, do not use any chemicals or abrasives. 

 
 
SECTION THREE 
BATTERY WARNING 
 

Reviews: