Wireless 11g Broadband Router
Version 1.0
26
4.2.10 Diagnostic
This page allows you to test your connection in two ways: Ping and & Internet
connection.
h
IP Address:
Enter the IP address that you would like to Ping, and then click on
the
Ping
button.
h
Connect to the Internet:
Click on the
Test Connection
button to test the
Internet connection.
4.2.11
Use as Access Point
This page allows you to configure the router into Access Point mode, only acting as a
bridge between the computers attached to all Ethernet ports (LAN) and the clients on
the wireless LAN (WLAN). To operate in AP mode, the router must share the same
subnet mask as the other LAN and WLAN devices.
