EnGenius FreeStyl SIP User Manual Download Page 34

Page: 34 / 77

~34~

“Vibrate”), lift the handset and

press

key to start a

conversation.

3. If the handset is not on the cradle and

-5-

2 “Any Key Talk” setting is “On

”

press any key (except

and the

SILENT

soft key) to answer.

Notes:

The LCD displays the caller’s Handset ID

You can press the

SILENT

(Left) soft key if you choose to ignore the call.

Unlike turning off the ringer the

SILENT

key operation is valid only for

the current call.

Ending a Call

To end a telephone or intercom call, press

key, or place handset into charger

cradle.

Adjusting Handset Receiver (Earpiece) Voice Volume

1. Voice volume can only be adjusted during a call.

00:00:15
Volume: 3

MUTE

OPTION

2. There are 6 levels of volume selections. Use

key to adjust.

3. The new setting will remain effective for all future calls

until changed.

Adjusting Handset Speakerphone Voice Volume

1. Voice volume can only be adjusted during a call (in

speakerphone mode).

00:00:15
Volume: 3

MUTE

OPTION

2. There are 6 levels of volume selections. Use

key to adjust.

3. The new setting will remain effective for all future calls

until changed.

Summary of Contents for FreeStyl SIP














































































Search results

Summary of Contents for FreeStyl SIP

Reviews:

Related manuals for FreeStyl SIP

Brands by name

Popular brands

EnGenius FreeStyl SIP, User Manual

Search results

Summary of Contents for FreeStyl SIP

Reviews:

Related manuals for FreeStyl SIP

Brands by name

Popular brands