EnGenius FreeStyl SIP User Manual Download Page 14

Page: 14 / 77

~14~

Handset Features

Basic Handset Features

1. 4-Line LCD (Liquid Crystal Display)

a. The LCD display has LED (Light Emitting Diode) for backlighting.

b. The 1

line of LCD consists of icons.

c. Icons explanation from left to right

(1)

RSSI

level (Receive Signal Strength Indicator)

During a call, the number of bars is proportional to
the radio signal strength received.

(2)

Link mode
(2.1) Call in-progress

(ON/OFF-Hook)

Indicates if the phone line is in the OFF-Hook status.

(2.2) Intercom in-progress

Indicates if Intercom mode is active.
Indicates the Handset ID that is sending the intercom call.

(3)

Line, Sound and Indication
(3.1) Line Indicator

Indicates when using line 1 or the incoming call from FXO line.

(3.2) SIP Indicator

Indicates when using SIP or the incoming call from SIP.

(3.3) Enable ringer

(3.4) Disable ringer

(3.5) Ringer and vibrate mode

(3.6) Vibrate mode

(3.7) Message waiting indicator

(4)

Disable PA and indicate speaker phone
(4.1)

Indicates if the incoming broadcast is disabled.

(4.2) Speaker indicator

Indicates if the speakerphone is active.

(5)

Two-Digit Handset ID

Displays the 2-digit Handset ID of owner.

(6)

Battery Strength

Number of bars is proportional to the amount of battery time remaining.

d. The 2

and 3

lines of the LCD, maximum 16-characters each, display

status, message, menu selections, or user-editable alphanumerical
characters.

Summary of Contents for FreeStyl SIP














































































Search results

Summary of Contents for FreeStyl SIP

Reviews:

EnGenius FreeStyl SIP, User Manual, Page: 14 / 77

Search results

Summary of Contents for FreeStyl SIP

Reviews: