~57~
Re:
Once entering the custom name, the greeting of LCD in standby
mode will be changed as the entering.
h. Press “8” to Change Password:
(1)
Enter original password (4 digits) when enter this menu.
(2)
Enter new password then press
SAVE
(Left) soft key to confirm
new password.
i.
Press “9” to set Headset Ring: See Headset Ring operation on Page
53.
7. Press “6” to set Base Settings:
When enter this menu, you must enter PIN code first (4 digits).
Re: The PIN code is for Base Settings.
a. Press “1” to set DTMF Duration.
(1)
Enter the DTMF duration (90~200ms), press
OK
(Left) soft key to
confirm the setting. Default is 100ms.
Re: Please check with your dealer before you change it. If the duration
not match with PSTN or PBX setting, it may operate faultily.
b. Press “2” select flash key timing. Default is 600ms.
(1)
Use
or
to scroll through option 1~9 (100~900ms).
(2)
Press
SELECT
(Left) soft key to confirm selection.
Re: The default value (US version: 600ms; AU version 100ms) works
in most areas. Changing this setting may cause Flash key not
working. Change only when you are certain of the new value
would work.
c.
Press “3” to set Assign Next HS
(1)
Enter 2-digit handset ID followed by pressing
OK
(Left) soft key.
(2)
When register a new handset, the base will assign the specific
handset ID which assigned in advance to the new handset.
d.
Press “4” to set Clear HS
(1)
Enter 2-digit handset ID followed by pressing
OK
(Left) soft key.
(2)
The base will erase the handset ID from system.
e.
Press “5” to Change PIN:
(1)
Enter the new PIN followed by
OK
(Left) soft key.
Re: Default PIN is “0000”.
f. Press “6” to set Auto Hang Up:
(1)
Use
CHANGE
(Left) soft key to select and confirm on or off. The
Default PIN is “0000”.
Re: When setting “on”, the FreeStyl 1 will automatically hang up if the
far end caller hung up already. However, this function depends on
if there is “Line Reversal” signal sent out by PBX or PSTN, after
the call hung up.
g.
Press “7” to Set Time to support DTMF Caller ID:
~58~
(1)
Use
CHANGE
(Left) soft key to select and confirm on or off. The
Default PIN is “0000”.
8. Press “7” to register & de-register handset: see Handset Registration
operation on Page
39
.
9. Press “8” to set Menu Display:
To avoid mis-setup of Call Settings (MENU-4), Phone Settings (MENU-5)
and Base Settings (MENU-6), you can hide these menus, so that other
handset users won’t have chance to mis-settup these settings.
Re: When entering the Menu Display, you have to enter password first.
a.
Press “1” to set hiding/un-hiding of the Call Settings menu.
(1)
Use
CHANGE
(Left) soft key to select and confirm on or off.
b.
Press “2” to set hiding/un-hiding of the Phone Settings menu.
(1)
Use
CHANGE
(Left) soft key to select and confirm on or off.
c.
Press “3” to set hiding/un-hiding of the Base Settings menu.
(1)
Use
CHANGE
(Left) soft key to select and confirm on or off.
Re: Select “On” means the menu will be displayed on screen. Select “Off”
means the menu will be hidden.
