~35~
Ending a Call
A. from Handset
To end a telephone or intercom call, press
key, or place handset into
charger cradle.
B. from Base
To end a telephone call, press
key. To end a intercom call, press
key.
Adjusting Handset Receiver (Earpiece) Voice Volume
1. Voice volume can only be adjusted during a call.
2. There are 6 levels of volume selections. Use
or
key to adjust
3. The new setting remains effective for all future calls
until changed.
00:00:15
Volume: 3
11
MUTE
OPTION
1
Adjusting Handset Speakerphone Voice Volume
1. Voice volume can only be adjusted during a call (in
speakerphone mode).
2. There are 6 levels of volume selections. Use
or
key to adjust
3. The new setting remains effective for all future calls
until changed.
Adjusting Base Speakerphone Voice Volume
1. Voice volume can only be adjusted during a call.
2. There are 6 levels of volume selections. Use
or
key to
adjust.
~36~
3. The new setting remains effective for all future calls until changed.
Placing a Call On Hold
1. When a call is in progress, it can be put on hold by
pressing the
key.
2. To return to the conversation, press
UNHOLD
(Left)
soft key
Notes:
1. The call being placed on hold can be “un-hold” by the handset
that puts it on hold. But if the handset press
key to go back
standby, then other handsets can press
or
to pick
this held call (If press
on base, it can also pick up this held
call).
2. Handset LCD displays a call is being on hold. An alert tone
(double beep) every 30 seconds will remind the handset that a
call is being on hold.
3. If the operation (e.g., call transfer) after putting a call on-hold
fails, the held call may be dropped.
3. When a call is in progress via base, it can be put on hold by pressing the
key.
4. To return to the conversation, press
or
key.
Mute
1. After a link is established, you can press
MUTE
(Left)
soft key to mute the handset microphone.
2. When mute is active, the other end will not hear your
voice, but still can speak to you.
3. To leave the mute state, press
UNMUTE
(Left) soft key. Mute is effective
only for the current call.
4. When in a call via base, you can press
to mute the base
