EnGenius EWS660AP User Manual Download

Page: 52 / 76

Location:

Specifies the location of the device.

Port:

Displays the port number.

Community Name (Read Only):

Specifies the password for the SNMP community for read only access.

Community Name (Read/Write):

Specifies the password for the SNMP community with read/write access.

Trap Destination Address:

Specifies the port and IP address of the computer that will receive the SNMP traps.

Trap Destination Community Name:

Specifies the password for the SNMP trap community.

SNMPv3 Status:

Enables or Disables the SNMPv3 feature.

User Name:

Specifies the username for the SNMPv3.feature

Auth Protocol:

Select the Authentication Protocol type: MDS or SHA.

Auth Key:

Specify the Authentication Key for authentication.

Priv Protocol:

Select the Privacy Protocol type: DES.

Priv Key:

Specifies the privacy key for privacy.

Engine ID:

Specifies the Engine ID for SNMPv3.

Summary of Contents for EWS660AP













































































Search results

Summary of Contents for EWS660AP

Reviews:

Related manuals for EWS660AP

Brands by name

Popular brands

EnGenius EWS660AP, User Manual

Search results

Summary of Contents for EWS660AP

Reviews:

Related manuals for EWS660AP

Brands by name

Popular brands