EnGenius ESR-9710 User Manual Download Page 25

Page: 25 / 95

ESR-9710 Wireless N Gigabit Router

Version 1.0

5 Wireless Network Setup Wizard

This wizard will guide you in the configuration of the wireless network settings such as
the SSID and security (WEP/WPA).

.Please refer to Chapter 6 in order to configure the more advanced features of the device

5.1 Logging In

To configure the device through the web-browser, enter the IP address of the device
(default:

192.168.1.2

) into the address bar of the web-browser and press

Enter

Make sure that the device and your computers are configured on the same subnet.
Refer to

Chapter 2

in order to configure the IP address of your computer.

After connecting to the IP address, the web-browser will display the login page.
Select

Admin

from the drop-down list and then leave the password field blank. Click

on the

Log In

button to continue.

5.2 Wireless Network Setup

Click on the

Wizard_Wireless

link under the

Basic

menu, and then click on the

Wireless Network Setup Wizard

button.

The wizard will inform you that there are two options: auto and manual.

Summary of Contents for ESR-9710
































































































Search results

Summary of Contents for ESR-9710

Reviews:

Brands by name

Popular brands

EnGenius ESR-9710, User Manual

Search results

Summary of Contents for ESR-9710

Reviews:

Brands by name

Popular brands