EnGenius ESR-1221N User Manual Download Page 67

Page: 67 / 104

Wireless Filter
Enable Wireless
Access Control:

Tick the box to Enable Wireless Access Control.

When Enabled, only wireless clients on the Filtering Table will be

allowed.

Description:

Enter a name or description for this entry.

MAC address:

Enter the MAC address of the wireless client that you wish to allow
connection.

Add:

Click this button to add the entry.

Reset:

Click this button if you have made a mistake and want to reset the
MAC address and Description fields.

MAC Address Filtering Table

Only clients listed in this table will be allowed access to the wireless network.

Delete Selected:

Delete the selected entries.

Delete All:

Delete all entries

Reset:

Un-tick all selected entries.

Summary of Contents for ESR-1221N









































































































Search results

Summary of Contents for ESR-1221N

Reviews:

Related manuals for ESR-1221N

Brands by name

Popular brands

EnGenius ESR-1221N, User Manual

Search results

Summary of Contents for ESR-1221N

Reviews:

Related manuals for ESR-1221N

Brands by name

Popular brands