B
ASIC
N
ETWORK
S
ETTINGS
M
ANAGEMENT
S
ETUP
4-39
4.5 Management Setup
The Management section lets you configure administration, management VLAN, SNMP settings, backup/restore settings, firmware
upgrade, time settings, and log settings. This chapter describes these settings.
4.5.1 Configuring Administrator Account
Click the Administration link under the Management menu to change the user name and password used to log on to the ENS500EXT
Web Configurator. The default user name is
admin
and the default password is
admin
. Changing these settings protects the
ENS500EXT configuration settings from being accessed by unauthorized users.
New Name
Enter a new username for logging in to the Web
Configurator.
New Password
Enter a new password for logging in to the Web
Configurator
Confirm Password
Re-enter the new password for confirmation.
Click
Save/Apply
to apply the changes or
Cancel
to return previous settings.
Remote Management
Enable or disable remote management.
Remote Upgrade
Specify whether the ENS500EXT firmware
can be upgraded remotely.
Remote Management Port
If remote management is enabled,
enter the port number to be used for remote management. For example: If you specify the port number 8080, enter
http://<IP
address>:8080
to access the ENS500EXT Web Configurator.
Click
Accept
to apply the changes or
Cancel
to return previous settings.
