EnGenius ENS500EXT User Manual Download Page 51

Page: 51 / 88

ASIC

ETWORK

ETTINGS

CCESS

OINT

ODE

4-23

Current Profile

Configure up to four different SSIDs. If many client devices will be accessing the network, you can arrange the

devices into SSID groups. Click

Edit

to configure the profile and check whether you want to enable extra SSIDs.

Click

to confirm the changes or

Cancel

to cancel and return previous settings.

SSID

Specify the SSID for the current profile.

VLAN ID

Specify the VLAN tag for the current profile.

Suppressed SSID

Check this option to hide the SSID from

clients. If checked, the SSID will not appear in the site survey.

Station Separation

Click the appropriate radio button to allow

or prevent communication between client devices.

Wireless Security

For details on wireless security settings, see

Configuring Wireless Security

Click

Save

to accept the changes or

Cancel

to cancel and

return previous settings.

Summary of Contents for ENS500EXT

























































































Search results

Summary of Contents for ENS500EXT

Reviews:

Related manuals for ENS500EXT

Brands by name

Popular brands

EnGenius ENS500EXT, User Manual

Search results

Summary of Contents for ENS500EXT

Reviews:

Related manuals for ENS500EXT

Brands by name

Popular brands