27
6.2
IP Settings
The
IP Settings
option of the
System
section allows the user to configure the IP settings.
1)
IP Network Settings – The user can select whether the ENH700EXT will obtain the IP
Settings automatically from the network or if the information will be inputted manually.
2)
IP Address – Specify the default IP Address that the ENH700EXT will be accessed by.
3)
IP Subnet Mask – Specify the Subnet Mask of the ENH700EXT.
4)
Default Gateway – Specify the default gateway of the ENH700EXT.
5)
Primary DNS - Specify the Primary DNS of the ENH700EXT.
When changing the IP Address or Default Gateway, the IP Address used to
access the ENH700EXT when logging in will change.
6.3
Spanning Tree Settings
The
Spanning Tree Settings
option of the
System
section allows the user to configure the
spanning tree settings of the ENH700EXT.
Setting up a Spanning Tree for large networks when using Client Bridge
Mode
or WDS Bridge can improve throughput. Spanning trees ensure that data will
never pass through the same node when going from point A to point B.
