manualshive.com logo in svg

EnGenius ENH1350EXT, User Manual, Page: 9 / 80

Share
Download
EnGenius ENH1350EXT User Manual Download Page 9

9

devices in common outdoor areas. 

The ENH1350EXT is easy to install in virtually any location 
with its included PoE (Power over Ethernet) adapter for 
quick outdoor installation. The ENH1350EXT enables 
network administrators to control its transmit power 
and feature settings for selecting narrow bandwidth and 

traffic shaping. The ENH1350EXT also supports wireless 

encryption including Wi-Fi Protected Access (WPA2-PSK) 

Encryption, and IEEE 802.1x with RADIUS.

System Requirements

The following are the Minimum System Requirements in 

order to configure the device.

•  Computer with an Ethernet interface or wireless network capability

•  Windows  OS(XP,  Vista,  7,  8,  10),  Mac  OS,  or  Linux-based  operating 

systems

•  Web-Browsing  Application  (i.e.:  Internet  Explorer,  Firefox,  Safari,  or 

 

  another similar browser application)

Package Contents

The ENH1350EXT package contains the following items:* 

• ENH1350EXT Access Point

• 2 detachable 5 dBi 2.4 GHz Omni-directional Antenna

• 2 detachable 5 dBi 5 GHz Omni-directional Antenna

• PoE Adapter (54V/0.6A)

• Power Cord

• Pole Mount Strap

• Wall Mount Screw set

• Quick Installation Guide

*(all items must be in package to issue a refund)

Summary of Contents for ENH1350EXT

















































































Reviews:

No comments