manualshive.com logo in svg

EnGenius ENH1350EXT, User Manual, Page: 69 / 80

Share
Download
EnGenius ENH1350EXT User Manual Download Page 69

69

Speed Test Parameters / LED Control 

This page allows you to analyze the connection quality 
of the AP and trace the routing table to a target in the 
network.

Target IP / Domain Name: 

Enter an IP address or domain 

name you wish to impelement a speed test for realizing 
the variance on wireless speed.

Time Period: 

Enter the time in seconds that you would like 

the test to implement for and in how many intervals. 

IPv4/IPv6 Port

:  This  Access  Points  uses  IPv4  5001  and 

IPv6 5002 port for the speed test.

Start

: Click start to implement speed test.

LED Control

Control LED on/off for Power, LAN interface, or 2.4 GHz/5 
GHz WLAN interface.

Power: 

Enables or disables the Power LED indicator.

LAN: 

Enables or disables the LAN LED indicator.

WLAN-2.4 GHz: 

Enables or disables the WLAN-2.4 GHz LED 

indicator.

WLAN-5 GHz: 

Enables or disables the WLAN-5 GHz LED 

indicator. 

Device Discovery 

This page allows you to discover devices from network 
for Operation Mode, IP Address, System MAC Address and 
Firmware version.

Summary of Contents for ENH1350EXT

















































































Reviews:

No comments