EnGenius EDS5255 User Manual Download

Page: 56 / 166

The

Live View Management

menu is located at the right side of the page.

There are two streams running concurrently: Stream1 (1920x1080) and Stream2 (640x360). Stream1 has the

higher resolution than stream2. Stream2 serves lower resolution for mobile devices which has smaller screens.

You can preview each stream at real time by selecting it from the list.

This opens the local folder where the real time captured images and clips are stored. You may change the

folder path at

Main Menu



System



PC Storage Path

This switch only applies to resolution 640 x 360. When enabled, the preview image will switched to 1:1 mode.

By default the image will expand and fill the view screen if the actual image is smaller than the view.

Summary of Contents for EDS5255







































































































































































Search results

Summary of Contents for EDS5255

Reviews:

Related manuals for EDS5255

Brands by name

Popular brands

EnGenius EDS5255, User Manual

Search results

Summary of Contents for EDS5255

Reviews:

Related manuals for EDS5255

Brands by name

Popular brands