Quick Installation Guide
EAP600
Wireless-N 300 + 300Mbps Long Range Ceiling Mount Dual
Concurrent AP
Please verify contents of the box before continuing to set up the EAP600.
EAP600 Access Point
12V/2A 100V~240V Power Adaptor
RJ-45 Ethernet Cable
Mounting Bracket
Wall/Ceiling Mounting Hardware Kit
T-Rail Mounting Hardware Kit
CD with User's Manual
Connecting the EAP600
1)
Ensure that the computer in use has an Ethernet Card (RJ-45 Ethernet Port). For more information,
verify with User Manual.
2)
Connect one end of the Category 5e Ethernet cable into RJ-45 port of the EAP600 and the other
end to the RJ-45 port on the computer that will use the EAP600. Ensure that the cable is securely
connected to both the EAP600 and the Computer.
3)
Connect the Power DC Inlet to the
DC-IN
port of the EAP600 and the Power to the electrical out.
Note
: EAP600 supports both IEEE 802.3at PoE(Power over Ethernet) and regular power adapter. You
should use either one as the power source. Please do not apply both at the same time.
