In WDS Bridge Mode, the EAP1750H can wirelessly connect different LANs by con guring the MACaddress and security
with each other. The best solution is to use the EAP1750H to wirelessly connect two wired LANs, as shown in the following
gure. WDSBridge Mode can establish up to four (4) WDSlinks, creating a star-like network.
channel. More Access Points connected together may lower throughput. This con guration can also be susceptible to
generate endless network loops in your network, so it is recommended to enable the Spanning Tree feature to prevent
this from happening. You can nd information about the Spanning Tree Function on page
EAP1750H
WDS Bridge
EAP1750H
WDS Bridge
EAP1750H
WDS Bridge
Client
Computer
Client
Computer
Client
Computer
Summary of Contents for EAP 11AC Series
