Engelmann Sensor GmbH,
Rudolf-Diesel-Straße 24-28, D-69168 Wiesloch-Baiertal, Germany
Page
9
of
23
Manual Gateway Device Monitor Version: V 1.2 / 2018_07_10 Subject to technical change!
3
Basic Settings
3.1
General
3.1.1.1
Value acceptance
Nearly all settings can be read by using the buttons "read" and set with buttons "write". The background
of the settings becomes green when the value is successfully transferred to the Gateway and red if
errors occur.
The Gateway will set the new values only by using the “write” button.
3.1.1.2
Device identifier wildcards
It is possible to put wildcards instead of the device identifier in some settings.
Identification no.:
Manufacturer code:
Version code:
Device type:
Wildcard:
FFFFFFFF
???
FF
FF
Example:
FFFFFFF-EFE-FF-FF only Engelmann devices
12345678-???-FF-08 only heat cost allocator with serial number 12345678
3.1.1.3
Display communication flow
Under the tab View it is possible to display and hide the communication flow windows to (TX) and from
(RX) the Gateway.
The commands are similar to the SMS commands.
(Some commands are not supported by SMS and are marked accordingly.)
