Engelmann Sensor GmbH,
Rudolf-Diesel-Straße 24-28, D-69168 Wiesloch-Baiertal, Germany
Page
11
of
23
Manual Gateway Device Monitor Version: V 1.2 / 2018_07_10 Subject to technical change!
3.3
Setup
3.3.1
Main config
3.3.1.1
GSM settings
GSM PIN: Four-digit number (default is the PIN is deactivated for m2m SIM cards)
GSM APN: max. 63 characters SIM card specific
If the Engelmann Gateway is delivered without a SIM card, a M2M SIM card must be inserted and the APN
value adjusted.
Factory settings: see picture
Information:
GSM status and RSSI (receive intensity) indicate the current values from Gateway (can’t be set)
3.3.1.2
GSM status
Under GSM status you can check which provider (GSM network) the gateway is current using. In addition, it is
possible to send a test file via the GSM network. For this, it is necessary that a FTP server was entered.
See "Data Transfer and FTP Settings”.
3.3.1.3
Time settings
A correct time setting is essential for the correct time execution of tasks. The corresponding values can be set
here. Alternatively, the PC time can be fetched.
Factory setting: timezone = +1
The factory setting of the clock in the Engelmann devices is standard Central European Time (GMT +1). There
is no automatic changeover to daylight savings time.
